Length 2.28m 7’6’’
Beam 1.22m 4’
Weight approximately 25 Kg or 55 lbs

This attractive clinker style rounded bottom traditional stem dinghy has 6 panels per side and is very roomy for her length.

She can take a simple lug sail for those who do not want the exercise of rowing.

The kit comprises:

· pre-cut wooden parts
. pre-cut joints
· epoxy for glue
· epoxy for coating the wood
· glass tape
· glass fabric
· hatches, seals & screws
· construction manual
· gunmetal rowlocks and sockets

Sandpaper and cosmetic paint and varnish are not included in the kit. The tools needed to build this boat are basic ones.

The build time is approximately 45 hours.

Customised boat for Wedgwood Exhibition.

Building Workshop - 15th March 2005

There has been a lot of interest in this kit and at last it is now ready.

Length 2.28m 7’6’’
Beam 1.22m 4’
Weight approximately 25 Kg or 55 lbs

Buy below

Following several requests the carrying handles, motor cut-out and transom stiffener are now a part of the standard kit.

This manual is intended for pre-build study or to help with the decision to purchase. Reading this manual will help you decide whether or not you can build the boat.

It is the manual that accompanies the kits. It describes all the techniques that will be used during the building and also a step by... (more)

An electronic, non paper, version of the 40 page study manual above that can be viewed using Adobe Reader 6.
After credit card authorisation the file will be sent to the email address put on the order form. The file is 1100 Kb & takes about 25 seconds to download on slow broadband.

For those without the time to build their boat the Stem Dinghy is available ready built. The price is £1,915.

The hull is assembled and given two coats of epoxy and is, therefore, ready to use. However, we encourage customers to paint their boats for visibility reasons.

The above price... (more)