Back to the start
About Fyne Boat Kits and building our kits
View the projects and news from Fyne Boat Kits


Sailing boat kits
Rowing boat kits
Canoe kits
Kayak kits
Our full range of boat kits


Building Materials and Equipment needed
Sailing Paddling and Rowing accessories
John Welsford Small Craft Designs
Special Offers


For more information please contact us
View Basket
How to Order
Terms and Conditions


NAVIGATOR - 14' 9" Cruiser, daysailer, race trainer

We looked hard at the seating, side decks and helm so she is really comfortable, there is space for up to six (four maximum is recommended) but she is still an ideal singlehanded cruiser. A kit of the major parts is now available.

LOA 4.5m 14ft 9in

Beam 1.8m 5ft 10in

Weight 140kg 309lbs

Sails 12.6sqm 136 sqft

Load 400 kg 880 lb

NAVIGATOR Plans - £169.14
NAVIGATOR Plans

Cruiser — daysailer — race trainer


Navigator was designed as a race trainer to serve the needs of a local club. Originally she had the rig shown on the study print below, a crew of three teenagers was intended, with its big sloop rig and shallow draft centreboard, to reward good sailing technique in a fairly open and windy club venue. There have been quite a few of these built, and I am told that they are very good boats, much enjoyed by their owners.
But, the surprise was when my friend Bob came to me wanting a long range cruising dinghy. We sat down for a browse through my drawings for some inspiration and Bob was very taken by the hull and internal layout of Navigator but wanted a rig with a different priority. We went for a standing lugsail, powerful but simple and easily handled this is a good sail for a cruiser, we then looked at a means of balancing the boat in severe wind conditions as well as trying to make the boat as easy to sail as possible.

I had used the yawl rig in other small boats and had succeeded in making the boats self steer on the wind with little more than a piece of shock cord on the tiller, in this case I organised the sail proportions to have the boat balanced with either main alone, or mizzen and jib only. This means that in a really hard chance the main halyard can be cast off and the boat still steered and handled when things are very bad.

Another consequence of the sail layout is that the mizzen can be sheeted on hard, then the boat will lay comfortably hove to head to wind while the crew take a break, very nice if a hot drink or meal is to be prepared on the go.

We looked hard at the seating, side decks and helm so she is really comfortable, there is space for up to six but she is still an ideal single handed cruiser.

Bob built his Navigator over about 4 months, the simple glued plywood lapstrake over stringers construction proving both fast and economical, the lightweight hull went together surprisingly quickly in the single car garage and it wasn’t long before we were down at the waters edge christening her.

We launched her on a very windy day and had a really good time rocketing around the bay. The performance is a real surprise, very fast in most conditions, close winded and easily handled, the hull, though light is seaworthy and stable, powerful enough to drive through a big wave and she has a surprisingly comfortable motion in the open sea, something that is not easy to achieve in a light dinghy hull but a real bonus in a boat which may be at sea for a whole day on coastal passages.

There are groups racing with three clubs that I know of and we even have an informal “owners group” who promote dinghy cruising and the design has been built in many variations including several with cabins and has somewhat humbled me with the enthusiasm with which she has been received, She is my favourite, one of those happy coincidences of fate, and perhaps one day I’ll have one of my own.


John Welsford
Designer

A small motor can be fitted.

 
NAVIGATOR Plans - £169.14
NAVIGATOR Plans

Quantity: 
Navigator Hull part kit - £999.12
Navigator Hull part kit

This is not a kit of all of the parts for this boat. The boat has been designed to be easy to build with a minimum of lofting but, where there is no option, we can supply the parts ready cut to size.

This kit contains the following pre-cut wooden parts:

· Bulkheads 1 - 3 and 5-8
· Knees for... (more)

Quantity: 
NAVIGATOR Plans - £169.14
NAVIGATOR Plans

 
NAVIGATOR Plans - £169.14
NAVIGATOR Plans

 

Just Photographs | What is NOT in the kit | Pre-Build Study
Supervised Build | Customer Information | Ready Built | Co. Info.
Boat Building DVD | Plans Only | Panel Cutting Router Bits
Flush Trim Cutter | Paint & Varnish

Fyne Boat Kits
Unit 5, Station Yard, Burneside, Kendal, Cumbria LA9 6QZ
Tel: 01539 721 770  
E-mail: info@fyneboatkits.com

site design by bf internet