This is the epoxy that we usually provide with the kits. It is a versatile epoxy that can be used for joints, fillets, glass fabric saturation and coating.

It has a slow initial cure time that makes it ideal for unpractised workers. It does not rely on solvents for treating the surface or softening for further coats thus it is perfect for those whose workplace is within smelling distance of a living area. There is no need to use respirators or have an air extractor system.

· Any accidental splashes on the skin can be cleaned with soap and water.

· This epoxy has virtually no smell.

· This epoxy must be applied at a temperature greater than 10º C to ensure a proper cure. At the other extreme it is possible to pre-heat the epoxy to 28ºC. to improve the penetration into the wood.

· The pot life of 0.5kg mass at 25ºC. is approximately 40 minutes

· Tack free cure time at 25ºC is between 4 and 5 hours

· Maximum time between coats without sanding is 12 hours

· Tensile strength 8,800 psi

· Tensile modulus 390,000 psi

· Tensile elongation 7.2%

· Flexural Strength 14,900 psi

· Flexural Modulus 441,000 psi

· Compressive Strength 12,300 psi

For advice on how to use epoxy click on the 'Building' button.

To obtain the correct mixture of resin and activator it is recommended that dispensing pumps are fitted to the bottles. See below

This is sufficient epoxy for small repairs. 1.5 kg is roughly 1.5 litres of mixed epoxy. For this volume measuring pumps are not necessary. For advice on how to use epoxy click on the 'Building' button.

Price includes VAT.
England or Wales postage & packing is about £7.50

As above in a 3 kg pack. This is the amount needed to coat an average dinghy deck twice

3 kg is approximately 3 litres of mixed epoxy.

For advice on how to use epoxy click on the 'Building' button.

Save on postage by ordering brushes and mixing sticks at the same time

As above in 6kg. This is sufficient for completing an average kayak.

SALE - £5 DEDUCTED FROM THE PRICE WHEN PAYING

6 kg is approximately 6 litres of mixed epoxy. For advice on how to use epoxy click on the 'Building' button.

SPECIAL OFFER. Price includes VAT

As above in 8kg.

SALE - £10 DEDUCTED FROM THE PRICE WHEN PAYING

8 kg is approximately 8 litres of mixed epoxy.

For advice on how to use epoxy click on the 'Building' button.

Save on postage by ordering brushes and mixing sticks at the same time

Price includes... (more)

One pump for the resin and one pump for the activator. For use with Professional Epoxy Coatings home epoxy packs.

Each pump measures out the correct amount. They make life a lot easier and will last for many packs of epoxy.

NOTE: pumps are included with the epoxy in our boat kits.

This is a mixture of wood and bleached cellulous micro fibres used to thicken epoxy for fillets and colour it to match the wood.

1 Litre

NOTE: wood flour blend is included in the boat kits.

Use to thicken epoxy for fillets and fairing.
It helps to prevent sagging.

This should be used in conjunction with Wood Flour to get the colour of the epoxy fillet to match the wood.

1 Litre

NOTE: silica is included in the boat kits.

" THE VIDEO IS FAR AND AWAY THE BEST THING I'VE SEEN ON THE SUBJECT AND ENTERTAINING ENOUGH FOR THE WHOLE FAMILY, REGARDLESS OF BOAT-PHOBIC TENDENCIES, TO ENJOY." ....Watercraft May/June 02

The Zen of Wooden Kayak Building

How to Build a Lightweight boat (not just a... (more)